Diesel Tuner's Blog

Drop-In Duramax Turbo Options

[fa icon="calendar'] Sep 7, 2016 2:17:28 PM / by Paul Wilson posted in Duramax Performance, Duramax, Duramax Power, 2013, 2014, 2016, 2011, 2015, LML, How to program my LML, More Power for my LML?, what are some upgrades I can go to my LML?, Turbo, 2012, LML Tuning, LML Power, Stock, Stock Turbo, Stealth 64, 2017, Stealth

[fa icon="comment"] 0 Comments


Drop-In Duramax Turbo Options

In the old days, there was no such thing as a "drop-in" turbo.  You pretty much had to buy a turbo that was designed for a different application and convert it to run on your Duramax.  Meaning the requirements for installation included several custom fabricated pieces to make it work.  

As technology in the diesel performance industry has advanced, our options for parts have expanded.  No longer do we have to use semi turbo's and roal coal to make power.  Now with the common rail injection system and variable vane turbo advancements there is a real need to find a turbo that makes more power than stock, while retaining all the benefits of a stock turbo. 

Benefits of a stock turbo:

  • Quick Spooling 
  • Clean installation
  • Reliable
  • Serviceable by any dealer or reputable shop
  • Requires no custom fabrication

Download Duramax Turbo Specifications

However, they do lack peak power, and peak power matters!  When looking for which upgraded unit to replace the stock turbo, we recommend matching the replacement as close as possible to the desired power level to minimize compromising drive-ability.  Any extra capacity you buy in peak for performance will cost you low end response.  Example: Looking to make 650rwhp? Buy a turbo that can just barely squeak out 650rwhp, do not buy something that's good for 850rwhp because it will drive poorly a light load. 

Read More [fa icon="long-arrow-right"]

How much boost should my stock Duramax turbo make?

[fa icon="calendar'] Jul 28, 2016 11:45:05 AM / by Paul Wilson posted in Duramax, Turbo, Stock, Stock Turbo, Drop-In, Stealth 64, Wheel Size, Turbo Wheel, Stealth

[fa icon="comment"] 0 Comments


Duramax engines have always come with solid turbos. However after miles and miles of whistling and boosting, your turbo may have problems. Or you may have other issues, that make you think your turbo has problems. This is very common as most drivers watch boost, keeping an eye on how much PSI they're making. It stands to reason that if your peak boost drops, your turbo has a problem. This is usually not the case though. More often then not, when we diagnose this symptom we find there are other problems leading to a lower than expected boost number. 

Target boost numbers for the following RPO's are as follows (PSI)

2001-2004 LB7- Stock 20-22, tuned 24-26, tuned with PPE boost valve 28-31.  Failure will occur near 34psi

2004.5-2016 Stock 22-24, Mild tune 27-28, Hot tune 33-35

The factory map sensor which electronically measures boost on a 2001-2004.5 trucks only reads to 22-24 psi, 2006-2016 MAP sensors read to 37 psi.  If you want to read boost numbers higher you'll need an aftermarket gauge. 

Stealth Boost Tester

 

Read More [fa icon="long-arrow-right"]

Subscribe to Email Updates

Lists by Topic

see all

Posts by Topic

see all

Recent Posts